Find Your Own Wiper Refill

Wiper refill a wiper wiping element, which is made of rubber and steel. It is a very crucial part of wiper blade. When your wiper blade worn out, many people replace wiper blade but sometimes, you may just need to change a new wiper refill on condition that your blade is no bent or damaged. It will totally save your cost much.
How to Choose a Good Wiper Refill
Wiper refill is made of rubber and steel. That is to say a good wiper refill must have a good wiper rubber and quality steel. As to rubber, there are two main kinds of rubbers in market now, one is natural rubber another is silicon. Rubber wiper refills tend to produce more chattering sound when rubbing against the glass windshield. Silicone blades have strong resist friction ability to prolong the service time of the whole wiper blade also they glide smoothly on the windshield without that chattering sound. Of course, the silicon cost high. In terms of used time, Rubber is made of organic materials that decay or degrade through time. It is easily affected by weather factors like heat and humidity. Wipers need to be strong against all these, especially sunlight. During the day and on summer season, cars lay under the scorching heat of the sun. Long exposure to UV rays can cause the rubber to become brittle. Having that said, silicone wiper refills performs better than rubber types. Silicone’s chemical makeup is proven to be highly resistant to oxygen, ozone, and heat. They are expected to last longer.
Consider these pros and cons of rubber and silicone wiper refills before heading to your local car parts store.
Attentions When You Buy Wiper Refill
If the blade on your vehicle is the Original Equipment unit or an Aftermarket replacement.
If it is an Aftermarket product, you must also know the manufacturer and type of blade and claw dimensions.
Do not forget to note the right measurements of the wiper blades that should fit your car.
Steps for Replace Wiper Refill
Step 1: Remove the worn-out blade from the car. Set the wipers away from the windshield. If there is a clips simply pinch them to remove the rubber.
Step 2: Slide the new blades into the wiper arm. Avoid pressing or pushing the rubber hard so it won’t tear. Use the tip of the screwdriver to keep the clips open while you’re inserting the new blades. Once the new blade is settled in place, tighten the clips and make sure that they are holding the rubber firmly.
Step 3: Repeat steps one and two to change the w iper blade on the second wiper arm. The wiper arm in the driver’s side is a bit longer so you have to be patient.
Step 4: After inserting the wiper refills, turn the windshield wipers on to check if the rubbers are placed properly.
Welcome to TOPPEX to find your own wiper refill.