How to Replace 3 Types of Windshield Wiper Blades

Windshield Wiper Blades

Replacing worn-out windshield wiper blades is essential for maintaining clear visibility and safe driving. With various types of wiper blades available, knowing the correct replacement procedure for each type is crucial. In this article, we will provide a step-by-step guide on how to replace three common types of windshield wiper blades: conventional wiper blades, beam wiper blades, and hybrid wiper blades.

By following these instructions, vehicle owners can confidently replace their wiper blades and ensure optimal performance. Let’s dive into the details and learn how to replace each type of wiper blade correctly.

 

Introduction to Windshield Wiper Blades

Windshield wiper blades are vital for maintaining visibility during inclement weather conditions.
Are you having trouble seeing out your windshield any time it’s raining even when you run your wipers ? Wipers that don’t work effectively leave streaks and reduce your visibility, so it’s really important to change them so you can drive safely.

While hook-mount blades are the most common wiper type, different vehicles may have varying styles and we’re here to walk you through changing each one. By the time you’re finished reading, you’ll learn how to remove and install the most common kinds of wiper blades and know when they need to be replaced.

 

Things You Should Know
Measure your wiper blades to find the right sizes. You can also check your vehicle’s manual or check a catalog at an auto parts store for the correct size and style.

Lift the wiper arm and blade off of the windshield.

Press the locking button or undo the latch if your wiper blade has one. Pull the wiper blade straight down toward the glass to remove it from the arm.

Slide the new wiper’s adapter into the arm’s hook and push it in until it clicks into place. You may need to close a latch to fully secure your wiper.

 

Hook-Mount Wiper Blades

Step 1. Check your owner’s manual for the right blade sizes. Hook-mount blades have a J-shaped hook on the end of the wiper blade, and they’re the most common type.

Page through your manual for information on your wiper blades and jot down the sizes. Note that the driver- and passenger-side wipers are different lengths so you don’t accidentally get the wrong size. Choose wiper blades that match the sizes exactly to ensure they fit.

Alternatively, use a tape measure to find the length of each wiper from one end of the blade to the other.
Don’t have your owner’s manual or a tape measure ? No worries ! Most automotive stores have a catalog or electronic system listing which wiper blades are compatible with your vehicle’s make and model.

Step 2. Lift the wiper blade off of your windshield.

Simply hold onto the wiper arm just below the blade and slowly pull it up and away from the glass. Keep lifting the arm until it’s perpendicular to your windshield and snaps into position so it doesn’t fall down.
Lay a towel on your windshield where the blade normally sits. That way, if you bump the wiper arm and it falls back down, it won’t damage or crack the glass.

Step 3. Press down on the wiper tab if there is one.

Search for a small tab or clip on the wiper blade where it attaches to the arm.

If you see one, use your finger or a Flathead screwdriver to press the tab down so the wiper can freely move around.
Some wiper blades don’t have clips and simply snap right into the hook on the arm.
Clip-On Wiper Blades

 

Measure your wiper blades to find the right size. Use a tape measure to find the length from one end of the rubber wiper blade to the other. Be sure to measure both the driver- and passenger-side wipers since they’re usually slightly different lengths.

When in doubt, check your vehicle’s manual or check wiper size compatibility at an automotive store.
Your owner’s manual will list the type of wiper you need, but you can tell if your blades are clip-on if they have a button or clip on the top side of the arm.

Raise your wiper blades up from your windshield. Hold onto the wiper arm where it connects to the blade. Gently pull the arm up and away from your windshield until it’s perpendicular to the glass.

Wiper arms are spring-loaded and could snap down against your windshield if you bump it. Place a towel on the glass just in case so it stays protected from damage.

Press the locking button down to pull off your blade. Look for the locking button on the top or side of the wiper arm just above where it attaches to the actual.

Use your finger or a Flathead screwdriver to press the button down and release the wiper blade. Then, just simply pull the wiper blade straight up and out from the arm.

Pin-Mount Wiper Blades

Find the size of your old wiper blades with a tape measure. Measure the length of the rubber blade from one end to the other and write it down.

Be sure to find the length for each individual wiper blade since they may vary a little in size.

The correct sizes for your wiper blades are also listed in the owner’s manual. You may also check auto parts stores to see if they have a catalog of which wiper blades are compatible with the make and model of your vehicle.

You can tell if wipers are pin-mounts since they’ll attach to the sides of the blades rather than through the top.

Lift your wiper arm off of the windshield. Grab onto the wiper arm just above where it attaches to the blade. Slowly pull the wiper arm up so the blade lifts off of the glass and is perpendicular to your windshield.

Lay a towel down on your windshield below your wiper blades. That way, if they fall down, they won’t crack or damage the glass.

Push the new wiper blade onto the pin and snap the latch closed. Open the latch on your new wiper blade. Hold your new wiper so the rubber blade faces your windshield.

Then, just slide the pin through the hole that has the same size on the side of the blade’s latch. To finish up, press the latch down until it clicks and lower the wiper arm and blade back against your windshield.Change the wiper blade on the passenger side at the same time.

 

When to Replace Wiper blades ?

Watch for streaking or screeching when you run your wipers.
The next time it rains, pay attention to how well you can see out of your windshield. If you notice streaks going across your windshield or the rubber blade making a loud sound as it moves across the glass, then it’s time to install new wipers.

 

https://www.topexwiper.com/wiper-blade/

 

Inspect the wipers for cracks or chips. The next time you get out of your vehicle, lift your wipers up off of your windshield and look at the rubber part of the blade.

Check for any areas that look damaged or that have come loose from the rest of the blade. If you notice any damage, try to replace the blade as soon as possible.

Using your windshield wipers when they’re damaged could leave permanent scratches in the glass.

 

wiper blade refill

• Product Name:wiper blade refill
• Model: all kinds of the wiper blades

  Year: 2010-2016, 2011-2019, 2010-2016, 2002-2008, 2017-2019，2020-2023

  Port
  Xiamen, China

  FEATURES AT A GLANCE
  Protecting Rubber coating.

  Low noise wiping performance and ensure extended rubber life and UV protection.

  using unique flexor strips to deliver even pressure distribution across the windscreen.

  This part has undergone vehicle try-on testing for conformance to product standards.

  PRODUCT SPECIFICATIONS OF THE WIPER BLADE REFILL

   

  Install new wipers every 6 months. After about 6 months, your wipers start to deteriorate in quality more quickly than they normally would.

  Keep track of the last time you switched out your wipers so you can easily remember when you need to change them out the next time.
  Maintain the wiper blades well, and the service life of the wiper blades will be longer.